4.4.3
Address Selection Switch
The 8-pole DIP switch is used to set the IP address and to select the protocol for
setting the IP address.
Table 16: Meaning of DIP switch positions
|
Address |
Meaning |
|
0 |
The IP parameter is configured via the web-based management.
BootP, DHCP and application of the values from the EEPROM
are available to the user. In the default status, configuration via
BootP is activated. |
|
1-254 |
The configuration of the IP address consists of the network
address (configurable and 192.168.1 by default) and the value set
for the DIP switch. |
|
255 |
The DHCP protocol is used to configure the IP parameters. |
